The use of Bricks or Pavers to develop a walkway or patio area complements a house in a way that is unmatched. In addition, setting up a Brick or Paver walkway does not necessarily require a pro.
The key to setting up a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. In addition, string lines ought to be strung on each side of the walkway.
As soon as the area has actually been dug down, 3/4" gravel stone need to be laid in and tamped down firmly. Then 2" of sand, or stone dust need to be spread out over the gravel. Again the sand/stone dust must be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline need to equal the thickness of the brick or paver.
Now that you have a stable base, put a 1" pipeline or ledger board the length of the sidewalk on either side of the walkway. Using a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will develop a level area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will act as your sidewalk border and assistance to keep the integrity and shape of the walkway.
When this is done, you can then begin to lay the bricks/pavers. There are lots of patterns you can lay. I especially like the Herring Bone pattern. The key to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will once again assist keep the integrity of the pathway.
Undoubtedly bricks/pavers will need to be cut or split when developing the pathway. To actually cut/split the brick/paver, lay it in a bed of sand and place the sculpt at a 75 degree angle over the area where you here want to break the brick. If cement brick making machine your walkway has curves you will need to buy/rent a wetsaw.
After setting up the bricks, develop up the outside edges with additional sand, and then shovel in the topsoil and pack down securely.
Spread stone dust over the new pathway and sweep into the cracks. This will complete the interlocking of here the bricks and assist to get rid of any weed development.
In addition, installing a Brick or Paver sidewalk does not necessarily need a pro. The key to installing a Brick or Paver Walkway is to first correctly prepare the area where the bricks/pavers are to be installed. Now that you have a stable base, place a 1" pipe or ledger board the length of the sidewalk on either side of the pathway. These strips will act as your pathway border and help to preserve the stability and shape of the sidewalk. Undoubtedly bricks/pavers will require to be cut or divided when constructing the pathway.